The way the monitor works is determined by the trigger line used for connection. The best way of installation is to connect it to the positive side of the vehicle reversing lamp. When this is opened, the monitor will automatically open whenever the gear is placed opposite.
If you want to install it for manual operation, you do not have to connect to this operation. You can connect on the source, which means that whenever you open the key, the monitor opens. As long as you turn off the engine, it will flameout. This mechanism is the best for those who use commercial vehicles. You just saw the first step of the connection. The second step is not the same as the first. For this connection, you simply connect the A4 harness to the output of the camera, which is usually regarded as the A4 wiring harness of the female output.
In this step, you must send the power to the camera by simply connecting the red line to a 12 volt power supply. Alternatively, you can connect to the positive side of the reverse side of the vehicle and connect the black to the ground.
Monitor installation When you are convinced that the monitor has taken the power out of the fuse box, the camera will also draw power from the reverse taillight. It is time for the system to work. Connect to the camera, then use the standard yellow cable also known as the A5 cable to continue the connection.
When connecting, please refer to the information provided above, because it will guide you to complete the connection process. When you know that the connection has been passed, the next step is to clean up the connection. Whenever it opens the key, or when it reversing, it will start working. Connect the positive and negative power provide wire of backup camera installation with the positive and negative leads of Backup lightweight Backup Light.
When the radio detects the backup lightweight is on by voltage, the radio switches into backup camera input mode mechanically. If the radio cannot switch into backup camera input mode mechanically once the backup lightweight is on, please check the barge between the police investigation lead and trigger wire or the matter that the trigger wire broken some elements. The backup camera installation guidelines discussed above do not apply to video based systems. It is a system based on the trigger line.
The connection discussed earlier is almost the same. When you want to make video based connections, the first thing to do is to master all the components.
This will help the installation process. They include the following:. These are the basic components or items that you need for this connection. These projects should perform important functions, which are as follows: Audio and video lines Another aspect of the installation process is the RCA cable. This is an important aspect, which includes the RCA video cable connected to the camera.
It has an important purpose. It can supply monitors from cameras. Camera power wire harness This includes a DC power connector, which is the power cord. The DC power connector is connected to the 12 volt power lead, just like black is used for grounding leads. It also uses a 12 pin power plug. The monitor of this connection has tails.
This, in turn, has video input. The input is RCA cable, it has different coat, red, white, yellow cable. White and yellow jackets are designed for video input. If you get used to the wiring in the TV, you will not find it difficult to install because it requires the same wiring process.
Movie camera The camera is the most important part of the system. This is not the same as the case found in the connection of the trigger. They are different in some ways. It has two parts of the wiring harness.
This type of camera does not require large holes and can be connected in a waterproof manner. Monitor power wire harness This is another important aspect of the installation process. The monitor is characterized by a power cord, which is always connected to a red or black DC power connector.
The other side of it is two wires. They include red lines and black lines. Black wires, as usual, will be on the ground, while the red line will become positive power supply.
Backup camera install Final report: This is what you need to install a backup camera. The installation process is not difficult, as you described from above.
Usually, manufacturers include guidance, which can help you in connection and installation process. This means that you should read the instructions and follow it. In addition, video tutorials are available. You can watch video tutorials and follow instructions. You can do it yourself. If you think it is not easy to do this, you can hire an expert to do it for you. The video based backup camera installation , this is the stages it will take:. Last Updated: February 26, References. This article was co-authored by wikiHow Staff.
Our trained team of editors and researchers validate articles for accuracy and comprehensiveness. This article has been viewed , times. Learn more To learn how to mount the rear-view camera and backup monitor, scroll down! Did this summary help you? Yes No. Log in Social login does not work in incognito and private browsers.
Please log in with your username or email to continue. No account yet? Create an account. Edit this Article. We use cookies to make wikiHow great. By using our site, you agree to our cookie policy. Cookie Settings. Learn why people trust wikiHow. Download Article Explore this Article parts. Tips and Warnings. Things You'll Need. Related Articles. Article Summary. Part 1. Buy a mountable backup camera for your specific vehicle.
For safety, make sure you purchase a device specifically designed to be a rear-view camera. Purchasing one made for your specific vehicle will make it easier to install than a standard aftermarket camera.
So you can install it easily, look for a camera that mounts onto or directly behind your license plate. Get an external monitor if you want to keep your existing rear-view mirror. An external backup monitor is a small video screen that mounts onto your windshield similarly to a GPS.
Though they take up more space than internal monitors, external monitors are far easier to see and can be easily replaced if necessary. However, keep in mind that it may not have all the same features as devices designed for use with backup cameras.
Purchase an internal monitor for a less obtrusive device. An internal backup monitor is a fully functioning rear-view mirror that houses a small screen inside the glass. Some internal monitors clip on top of your current rear-view mirror, but others replace your original mirror entirely.
Some camera models use wireless transmitters instead of standard video cables. Part 2. Take off your rear license plate. Using a Phillips head screwdriver, remove each of the screws holding your rear license plate in place. Then, pull the plate off and set it aside. Pop open your trunk and look for a solid interior panel covering the opposite side of your license plate mounting area.
Then, insert a trim removal tool or other thin device behind the panel and pry it off. Drill a small hole in the license plate mounting area. Make sure there are no obstructions between the license plate mount and the rear wiring chamber. Then, create a small hole in the car using a power drill equipped with a high-speed twist drill bit. Then, note the spot where its splitting cord sits. If you come across any obstructions, try to remove them. Place a rubber grommet around your camera cable.
Before running your camera cable into the car, slip a rubber grommet onto it near the non-splitting end. These small rubber washers, available at most home improvement stores, will keep the wire in place and prevent leaks. Run the camera cable into your trunk. Make sure you pull it tight so the rubber grommet lodges into the drilled hole. Your camera cable should run from the outside of the car to the inside of the car. Using a wire stripper or pliers, peel back the rubber covering the wires.
Then, use a screwdriver or other thin tool to poke a hole through the middle of each exposed wire, separating the individual wire strands. Fuse your camera wires with the reverse light wires.
Then, poke your bare wires through the center of the exposed reverse light wires and twist them together. For safety, make sure you wrap the combined wires in electrical tape. Part 3. Then, run it through your vehicle to the area by the fuse box. Fix external monitors to the front windshield. Then, hook your monitor onto the mount. Most external monitors use a suction mount, though others may come with a more complex mounting system.
0コメント